Cobalt Hollow
CrystalGauge

CrystalGauge™ tds meter

$79.99

  • Six readings in one handheld tester, so one tool covers it
  • Backlit screen reads at night, indoors or in bright sun
  • Automatic temperature compensation adjusts to the sample
  • One-tap hold freezes a reading so you can write it down

What's included

  • CrystalGauge 6-in-1 Digital Water Tester×1
  • User Manual & Calibration Guide×1
  • Protective Carry Pouch×1
Tracked Shipping
  • Dip the probe into your water sample and power on the device.
  • Wait a few seconds while the sensor stabilizes and calculates live readings.
  • Read pH, TDS, EC, salinity, specific gravity and temperature on the backlit screen. Tap once to freeze a reading.
  • 1x CrystalGauge 6-in-1 Digital Water Tester
  • 1x User Manual & Calibration Guide
  • 1x Protective Carry Pouch
  • 2x Button Cell Batteries (pre-installed)
  • 1 digital guide: The Water Pen Handbook (PDF, emailed after your order)

We offer free shipping on orders over $150. Once your order is dispatched, the estimated delivery time is 5 to 12 business days depending on your location — tracking is emailed as soon as it ships.

Changed your mind? You can return your product within 90 days of delivery for a refund — see our Returns page for the full policy.

What the CrystalGauge tester gives you

Six measurements, one tester

Checking tap water, a pool, an aquarium and a hydroponic setup often means owning several single-purpose testers. This one shows pH, TDS, EC, salinity, specific gravity and temperature, so a single compact tool handles each job.

One-tap hold for logging

Reading a number while your hands are busy and a notebook is nearby is awkward. One tap freezes the reading on the screen, so you can lift the probe out of the sample and note the value.

CrystalGauge

Auto power-off

A tester left switched on drains its batteries between uses. This one powers down after five minutes of inactivity, so the two button cell batteries are not running while the unit sits idle.

Readable screen, portable body

Water gets checked in different places and at different hours. The backlit display can be read at night, indoors and in bright outdoor sunlight, and the handheld body comes with a protective carry pouch.

Frequently Asked Questions

It shows pH, TDS, EC, salinity, specific gravity and temperature from one handheld unit. You can use it on tap water, pools, aquariums and hydroponic setups.

No. It ships pre-calibrated, and only occasional recalibration is recommended. The box includes a User Manual and Calibration Guide for when you want to recalibrate.

It runs on two button cell batteries, which come pre-installed. The tester also powers off after five minutes of inactivity.

Yes. The display is backlit, so you can read it at night, indoors or in bright outdoor sunlight. After dipping the probe, wait a few seconds while the sensor stabilizes.

It reports salinity and specific gravity along with the other readings, so it suits marine tanks as well as pools. It works on tap water, aquariums and hydroponic setups too.

You get the CrystalGauge 6-in-1 Digital Water Tester, a User Manual and Calibration Guide, a protective carry pouch and two pre-installed button cell batteries.

Tap once while the value is showing. One tap freezes the reading, so you can lift the probe out of the sample and record the number.

The kit includes a protective carry pouch, so you can bring the handheld tester along when you check water in different spots, such as a pool or an aquarium.

A TDS meter reads total dissolved solids in a water sample. CrystalGauge also reads pH, EC, salinity, specific gravity and temperature, so one handheld tds and ec meter covers several water checks.

Dip the probe into the water sample and power on the device, then let the sensor stabilize. The backlit screen of this digital TDS meter then shows all six readings.
CrystalGauge

Ready to make it yours?

Get CrystalGauge at today's price — and a full 90 days to enjoy it.

90-Day Money-BackTracked Shipping
Secure Checkout
Tracked Shipping
Customer Support
Loved by our customers

CrystalGauge: A TDS Meter for Tap Water, Pools and Tanks

Anyone checking tap water, a pool, an aquarium or a hydroponic reservoir often ends up with a drawer full of single-purpose strips and pens. A TDS meter that also reads five other values puts those checks into one handheld tool.

CrystalGauge is a digital TDS meter that doubles as a TDS and EC meter. It reads pH, salinity, specific gravity and temperature too, so a total dissolved solids test and a salinity check use the same probe. A backlit screen keeps the numbers readable at night, indoors or in bright outdoor sunlight, and automatic temperature compensation adjusts for the temperature of the sample.

As a TDS water tester for tap water, pools, aquariums and hydroponic systems, it has a hold function that freezes a reading with one tap, so the number can be noted down hands-free.

  • Dip the probe into the sample and power on
  • Let the sensor stabilize
  • Read all six values on the screen