Cobalt Hollow
RainArc

RainArc™ sprinkler tripod

$69.99

  • Wide-set legs grip sloped ground, so the head stays put
  • Radius dial from 5 to 12 meters suits beds or lawns
  • Standard G1/2" thread screws onto a hose, no adapters
  • Zinc-alloy and plastic head, built for hose-end use

Option: Plastic nozzle

What's included

  • RainArc Sprinkler Tripod×1
  • User Manual×1
Tracked Shipping
  • Spread the tripod legs and set the base on the ground, level or sloped.
  • Screw the hose onto the G1/2" thread by hand.
  • Turn the dial to the spray radius you want, then open the tap.
  • 1 × RainArc Sprinkler Tripod
  • 1 × User Manual
  • 2 digital guides: Even Sprinkler Coverage for Lawns and Beds, Sprinkler Run Times for Every Zone (PDF, emailed after your order)

We offer free shipping on orders over $150. Once your order is dispatched, the estimated delivery time is 5 to 12 business days depending on your location — tracking is emailed as soon as it ships.

Changed your mind? You can return your product within 90 days of delivery for a refund — see our Returns page for the full policy.

How the RainArc sprinkler is built

Reinforced tripod base

A sprinkler that shifts on a slope leaves dry patches and soaks the path. Three wide-set legs grip uneven or sloped ground, so the sprinkler stays put when the water comes on.

Dual-outlet rocker nozzle

Moving a hose again and again gets old. Two synchronized outlets on a rocker nozzle send water across a wide path, so one spot in the yard covers more ground.

RainArc

Adjustable spray radius

A small raised bed and an open lawn need different spray sizes. A dial sets the radius between 5 and 12 meters, so one sprinkler can serve both without swapping heads.

Standard hose connection

Hunting for fittings slows down watering. The G1/2" thread and 16mm nipple screw straight onto a hose, so you need no adapters or tools, and there are fewer connection points where a leak can start.

Frequently Asked Questions

The dial sets the spray radius from 5 to 12 meters. Choose a small setting for a raised bed and a larger one for open lawn. Move the tripod when you want to reach another part of the yard.

Spread the three legs fully and set the base on the ground. The wide-set legs grip uneven or sloped ground, so the sprinkler stays put when the water comes on.

The sprinkler has a G1/2" thread and a 16mm nipple. Screw the hose fitting onto the thread by hand, with no adapters or tools. The direct connection means fewer places for a leak to start.

Use the radius dial to shrink the spray circle, and place the tripod so the edge falls short of the house or driveway. The oscillating nozzle and rotating jet then spread water across the area you set.

Yes, it connects to a hose. The direct-flow jet design keeps running smoothly on well water and hard water without clogging, so murky or mineral-heavy supplies fit.

The design range is 0.5 to 3.0 bar. That covers typical home spigots, including lower-pressure setups.

The head is made of zinc alloy and plastic, not brass. The tripod base holds it upright on the ground while it runs.

Yes. The oscillating nozzle works with the 360° rotating jet, and the dial sets the radius. Place the tripod near the middle of the bed and adjust the dial until the spray reaches the edges.

RainArc ships as one sprinkler tripod with one user manual. The legs spread to form the base, and the hose screws onto the built-in thread.

RainArc has a built-in G1/2" thread and a 16mm nipple that screw onto a standard garden hose, so a tripod lawn sprinkler setup starts without adapters or tools.
RainArc

Ready to make it yours?

Get RainArc at today's price — and a full 90 days to enjoy it.

90-Day Money-BackTracked Shipping
Secure Checkout
Tracked Shipping
Customer Support
Loved by our customers

RainArc: A Sprinkler Tripod for Lawns and Garden Beds

A sprinkler lying in the grass tends to tilt on a slope and soak one patch while missing the next. A sprinkler tripod lifts the head off the ground and spreads three wide-set legs across sloped or uneven soil.

RainArc is a tripod irrigation sprinkler with a dual-outlet rocker nozzle. Two synchronized outlets throw water across the path, so a lawn is watered from one spot while the hose stays put. A dial sets the spray radius, so the same unit suits a small raised bed or a larger lawn.

The standard G1/2" thread and 16mm nipple screw straight onto a garden hose, so no adapters are needed. The head is made of zinc alloy and durable plastic, and this sprinkler tripod is set up without tools.

  • Tripod lawn sprinkler for open grass and sloped yards
  • Tripod water sprinkler with an oscillating nozzle and 360° rotating jet
  • Shaped watering patterns for odd-shaped beds