
VertexDrain™ pool cover pump
How the VertexDrain Pool Cover Pump Is Built
Clears Standing Water
Rain collects on a cover and sits there until someone bails it out. The submersible pump rests in the pooled water and moves it out through the hose, so you can skip the bucket.
Dry-Run Shutoff
You can't always stand by while a pump works. A built-in thermal sensor cuts power to the motor when the water runs dry, so the pump stops by itself once the cover is drained.

Ceramic Shaft
A pump that sits in wet, dirty water through a storm is one you want to know the build of. The shaft inside this pump is made of ceramic, so you know what material turns in the housing.
Hose and Fittings Included
Hunting for the right fitting is what often delays a job. The box holds a 5-meter hose, 19mm and 12mm nozzles and a 3/4in to 1/2in adapter, so you can connect it right away.
Frequently Asked Questions

Ready to make it yours?
Get VertexDrain at today's price — and a full 90 days to enjoy it.
VertexDrain: A Submersible Pool Cover Pump for Rainwater
Rain pools on a pool cover, and bailing it out by bucket is slow, awkward work. A pool cover pump moves that water off through a hose instead. VertexDrain is a submersible pool cover pump with a flat, evenly weighted base, so it sits steady on solid vinyl and mesh safety covers.
Leaving a pump running unattended is a concern when the water could run out. A built-in thermal sensor cuts the motor once the pump runs dry, so draining can go on without someone standing by.
For an above ground pool cover pump, setup is simple: place it at the lowest point of the pooled water, attach the hose, plug into a nearby outlet, and flip the switch.
- Submersible body with a ceramic shaft
- Fits solid vinyl, mesh, and above-ground covers
- Switch-operated, plugs into a nearby outlet




