Cobalt Hollow
Cobalt Hollow
ElectraPulse

ElectraPulse™digital clamp meter

$89.99

  • Accurate readings on motors and inverters
  • Bright backlit display for dark cramped panels
  • Detect live wires before you ever touch them
  • Catch every digit with 6000-count resolution

FREE GIFT

Under-Desk Cable Management Kit

FREE$24.99
Tracked Shipping
  • Open the jaw and clamp it around a single wire, no need to cut power or strip insulation
  • Select current, voltage, resistance, or temperature, then let the sensor read the wire's magnetic field
  • Get a stable, accurate reading on the backlit display in under a second, even on motors and inverters
  • 1 x ElectraPulse Digital Clamp Meter (battery not included)
  • 1 x Protective Case
  • 1 x User Manual
  • 1 x Temperature Probe
  • 1 x Test Lead

We offer free shipping on orders over $150. Once your order is dispatched, the estimated delivery time is 5 to 12 business days depending on your location — tracking is emailed as soon as it ships.

Changed your mind? You can return your product within 90 days of delivery for a refund — see our Returns page for the full policy.

Why ElectraPulse Earns Trust On Every Job

True RMS Accuracy On Any Load

ElectraPulse samples the real waveform instead of assuming a clean sine wave, so motors and inverters get a stable, correct reading every time.

Built To Outlast The Job

Rugged housing shrugs off drops, dust, and daily jobsite abuse, so one hard knock won't leave you second-guessing every reading that follows.

ElectraPulse

CAT III 600V Overvoltage Shield

Class II insulation and CAT III 600V protection stand between you and a dangerous fault when you're working on live panels.

One-Hand, Zero Guesswork

One dial gets you from voltage to resistance in a click, no manual required to find the mode you need.

Frequently Asked Questions

Yes, ElectraPulse reads AC and DC current up to 600A, giving you the versatility to test everything from car batteries to home circuits with one tool.

True RMS means ElectraPulse samples the actual waveform instead of assuming a clean sine wave, so you get a stable, correct reading on motors, inverters, and other non-linear loads that trip up cheaper meters.

Yes. Hold ElectraPulse's clamp near the wire and it triggers a visual and audible alert the instant it senses live voltage, even through insulation, backed by CAT III 600V protection for extra confidence in the panel.

Just plug the included temperature probe into the meter and get instant readings from -58°F to 2372°F, perfect for HVAC and appliance troubleshooting.

Absolutely. The high-contrast LCD stays sharp outdoors, and the backlight kicks in automatically so you never lose a reading indoors or out.

Most clamp meters lose their reading when the jaw doesn't fully close around a single wire or the mode dial is set wrong. ElectraPulse's reinforced jaw seats firmly every time, so you get a steady number, not a blank screen.

ElectraPulse is built to hold a stable reading even at low amperage, so you're not left guessing about a small draw. The True RMS sampling catches the real signal instead of rounding it away like cheaper clamps do.

For most home panels and light commercial work, CAT III 600V is the safety standard to look for. ElectraPulse carries CAT III 600V with Class II insulation, so you're protected against voltage spikes while testing live circuits.

A digital clamp meter measures current by clamping around a single wire, without cutting power or stripping insulation. ElectraPulse also measures voltage, resistance, and temperature, and reads AC and DC current.

A multimeter measures through test leads touching the circuit, while a digital clamp meter reads current by clamping around a wire. ElectraPulse includes a test lead and a temperature probe for other measurements.
ElectraPulse

Ready to make it yours?

Get ElectraPulse at today's price with your free gift included — and a full 90 days to enjoy it.

Your free gift: Under-Desk Cable Management KitFREE
90-Day Money-BackTracked Shipping
Secure Checkout
Tracked Shipping
Customer Support
Loved by our customers

ElectraPulse: A Digital Clamp Meter for Panels and Motors

ElectraPulse is a digital clamp meter for electricians, HVAC technicians, and home users who measure current without cutting power or stripping insulation.

The jaw opens around a single wire, and one dial selects current, voltage, resistance, or temperature. As a True RMS meter, it samples the real waveform on motors and inverters. It works as an ac clamp meter and a dc clamp meter for car batteries and home circuits, with a 600A current range. The included temperature probe covers -58°F to 2372°F.

This digital clamp meter carries CAT III 600V and Class II insulation, plus a backlit display for dark panels and a rugged housing. The box contains:

  • ElectraPulse clamp meter (battery not included)
  • Protective case
  • Temperature probe and test lead
  • User manual

You may also like

ChromaGlow

Smart Touch Bedside

ChromaGlow

$79.99

VerityScan

Hidden Camera Detector

VerityScan

$99.99

Free gift included