
ScrapSweep™ garbage disposal
How ScrapSweep handles kitchen scraps
3/4 HP grinding motor
Peels and plate scrapings pile up when a sink has no way to deal with them. A 3/4 HP motor drives the grinder, so scraps go down the drain opening instead of into the trash.
Two-stage grinding
Large pieces of waste can catch in drain pipes. Two separate grinding stages break scraps into smaller particles before they leave the chamber, which suits households that cook often.

Acoustic dampening
A noisy appliance is hard to live with in an open kitchen. Sound dampening around the motor reduces vibration and grinding noise carried through the housing and the sink.
Overload protection
A jam can stall a motor mid-job. A built-in sensor detects the jam and shuts off power, so you clear the chamber, reset the unit and carry on.
Frequently Asked Questions

Ready to make it yours?
Get ScrapSweep at today's price — and a full 90 days to enjoy it.
ScrapSweep: A Garbage Disposal for Everyday Kitchen Scraps
A garbage disposal grinds peels, plate scrapings and cooking trimmings under the sink, so they do not pile up in the strainer before trash day. Cooking for a household produces a steady stream of vegetable peels, fruit scraps and cooked leftovers.
ScrapSweep is a continuous feed garbage disposal. The switch stays on while scraps go in, so trimmings from a cutting board are fed in without stopping between loads. Cold water runs in the sink during grinding.
Inside, a two-stage steel grinder breaks waste into small particles before the drain line. Acoustic dampening is built into the housing, and an overload sensor shuts off power when it detects a jam.
This garbage disposal unit uses a standard 3-bolt mounting system and plugs into an ordinary under-sink outlet, so replacing an old unit needs no hardwiring. Setup uses simple hand tools, and the power cord is already attached.




