Spritz Cookie Recipe for a Cookie Press, Plus Fixes for Sticking
A classic spritz cookie recipe for a cookie press, with exact amounts, oven temperature and fixes for dough that sticks to the press: dough temperature, pan type and disc choice.
The Cobalt Hollow Team
November 21, 2026 · 6 min read

A reliable spritz cookie recipe for a cookie press uses butter, sugar, one egg, flour, vanilla and a pinch of salt, mixed into a soft dough that you press onto a cool, ungreased baking sheet. Keep the dough at room temperature, use a plain sheet with no parchment or grease, and lift the press straight off the sheet to release each shape. Bake at 350°F (175°C) until the edges are pale gold. The recipe is below, followed by fixes for dough that does not stick, and a section on making these cookies without a press.
Spritz cookie recipe for cookie press: ingredients
This is a classic buttery spritz dough. The ingredient list is short, so the temperature of each item matters. The recipe makes several dozen small cookies, depending on the disc you use.
- 1 cup (226 g) unsalted butter, softened to room temperature
- 2/3 cup (133 g) granulated sugar
- 1 large egg
- 1 teaspoon vanilla extract
- 1/2 teaspoon almond extract (optional)
- 2 1/2 cups (315 g) all-purpose flour
- 1/4 teaspoon salt
- Gel food coloring, sprinkles or colored sugar for decorating (optional)
Use real butter and soften it on the counter until a finger leaves a dent without sinking in. Melted or greasy butter makes a dough that spreads in the oven and loses its pattern.
Step-by-step method
A note on terms: the disc that shapes the dough is also called a mold or a plate, and this guide uses "disc" and "mold" for the same part.
- Heat the oven to 350°F (175°C). Leave the baking sheets plain, with no grease and no parchment paper.
- Beat the butter and sugar in a large bowl until light and creamy.
- Beat in the egg, vanilla and almond extract (if using) until combined.
- Whisk the flour and salt together, then add them to the bowl in two additions. Mix just until the dough comes together and no dry streaks remain.
- For colored cookies, divide the dough and knead in a few drops of gel food coloring per portion.
- Pack the dough into the barrel of your press, pressing out air pockets as you go.
- Fit your chosen disc, set the press flat on a cool baking sheet, press once, and lift straight off the sheet.
- Decorate with sprinkles or colored sugar before baking, since the dough dries out and holds less afterward.
- Bake until the edges are just pale gold. Check the first tray early, because ovens vary and small shapes bake sooner than large ones.
- Cool on the sheet for 2 minutes, then move the cookies to a rack.
Follow your oven manual for rack position and use oven mitts when handling hot sheets.

The press you use: loading and pressing
Any barrel-style press works with this dough, but the tool's design affects how you work. The CrumbCraft is a stainless steel cookie press that comes with 13 cookie molds and 8 icing nozzles. You open the barrel, fill it with soft dough, pick a mold, and press with light hand pressure.
Its solid stainless steel body gives you a rigid barrel to grip when the dough is on the stiff side. The stainless steel pieces go in the top rack of a dishwasher, and the press, molds and nozzles all fit in one storage box.
In this guideCrumbCraft$69.99ViewWhy dough won't stick to the pan: fixes
When a pressed cookie lifts off with the press instead of staying on the sheet, the cause is nearly always one of three things: the dough temperature, the pan surface, or the disc. Work through them in that order.
Dough temperature
Dough that is too cold is stiff and does not release from the disc. Dough that is too warm is greasy and slumps. Aim for soft, pliable dough at room temperature. If it feels firm, knead a small handful in your hands for a moment. If it feels oily, rest the bowl in the refrigerator for a few minutes, then try again.
Pan type
Use a cool, ungreased, rimless or lightly rimmed metal sheet. Grease and parchment give the dough a slick surface, so it clings to the press instead. A sheet fresh from the oven melts the butter on contact, so let it cool fully between batches or rotate between two sheets. For more on how bare metal surfaces behave with food, read our guide to stainless steel pans, which covers sticking on metal.
Disc choice and technique
Intricate discs with fine detail need soft dough and a clean press. Simple shapes such as rounds, wreaths and ridged logs suit a first batch. Hold the press flat and square to the sheet, press until the dough fills the shape, pause, then lift straight off without twisting.
| Problem | Likely cause | Fix |
|---|---|---|
| Dough stays on the press | Greased or lined pan, or warm sheet | Use a cool, ungreased metal sheet |
| Dough does not leave the barrel | Dough too stiff or cold | Let it sit at room temperature and knead briefly |
| Shapes are blurry | Dough too soft or warm | Chill the dough in the refrigerator for a few minutes |
| Shapes are partial or ragged | Air pockets, or the press was tilted | Repack the barrel and press flat to the sheet |
| Cookies spread when baking | Butter too soft, hot pan | Cool the pan between batches |
| Dough crumbles | Too much flour | Spoon and level flour, or add 1 teaspoon of milk |
Field note
Press one cookie first. If the shape sticks to the press, adjust the dough or pan before you fill the whole sheet.
Spritz cookie press recipe variations
The base dough takes flavor changes well, as long as you keep the amount of liquid steady.
- Chocolate: replace 1/4 cup (30 g) of the flour with unsweetened cocoa powder.
- Lemon or orange: add 1 teaspoon of zest and swap the almond extract for 1/2 teaspoon of the same citrus extract.
- Holiday colors: knead gel food coloring into portions of dough. Gel adds color without much extra liquid.
- Sandwiched: press rounds or small shapes, then fill pairs with jam or frosting once cool.
- Dipped: dip cooled cookies halfway into melted chocolate and set on a rack.
With a set that includes icing nozzles, you can also pipe borders or rosettes onto cooled cookies for finishing touches.

Spritz cookies without a cookie press
You can still make spritz cookies without a cookie press. The dough needs a small adjustment for each method.
Piping bag
Fit a piping bag with a large decorative tip, fill it with the soft dough, and pipe rosettes, S-shapes or short ridged fingers onto a cool sheet. If the dough is hard to squeeze, let it warm slightly or add 1 teaspoon of milk.
Roll and cut
Chill the dough for 1 hour, roll it to about 1/4 inch thick, and cut with cookie cutters. The texture is a little denser than pressed cookies, but the flavor is the same.
Slice-and-bake
Shape the dough into a log, wrap it, chill it for 2 hours, then slice rounds and bake. Press a fork across each slice for the classic ridged look.
Storing and freezing
Store cooled cookies in an airtight container at room temperature, with sheets of parchment between layers. Freeze baked cookies in a sealed container, or freeze portions of dough and thaw them fully at room temperature before pressing. After use, wash the press right away, since dried butter dough is hard to clear from the discs. Browse more tools in our Kitchen Gadgets & Utensils collection.
Checklist before you press
- Butter softened, not melted
- Dough soft, at room temperature
- Barrel packed with no air pockets
- Baking sheet cool, plain and ungreased
- Press held flat, lifted straight off
- One cookie pressed first before filling the tray
- Oven at 350°F (175°C), first tray checked early



